Until recently, American aviators had not given serious attention to any form of flying machines aside from biplanes.
Of the twenty-one monoplanes competing at the International meet at Belmont Park, N. Y., in November, 1910, only three makes were handled by Americans. Moissant and Drexel navigated Bleriot machines, Harkness an Antoinette, and Glenn Curtiss a single decker of his own construction. On the other hand the various foreign aviators who took part in the meet unhesitatingly gave preference to monoplanes.
Whatever may have been the cause of this seeming prejudice against the monoplane on the part of American air sailors, it is slowly being overcome. When a man like Curtiss, who has attained great success with biplanes, gives serious attention to the monoplane form of construction and goes so far as to build and successfully operate a single surface machine, it may be taken for granted that the monoplane is a fixture in this country.
Dimensions of Monoplanes.
The makes, dimensions and equipment of the various monoplanes used at Belmont Park are as follows:
Bleriot--(Moissant, operator)--plane length 23 feet, extreme breadth 28 feet, surface area 160 square feet, 7-cylinder, 50 h. p.
Gnome engine, Chauviere propeller, 7 feet 6 inches diameter, 1,200 r. p. m.
Bleriot--(Drexel, operator)--exactly the same as Moissant's machine.
Antoinette--(Harkness, operator)--plane length 42 feet, extreme breadth 46 feet, surface area 377 square feet, Emerson 6-cylinder, 50 h. p. motor, Antoinette propeller, 7 feet 6 inches diameter, 1,200 r. p. m.
Curtiss--(Glenn H. Curtiss, operator)--plane length 25 feet, extreme breadth 26 feet, surface area 130 square feet, Curtiss 8-cylinder, 60 h. p. motor, Paragon propeller, 7 feet in diameter, 1,200 r. p. m.
With one exception Curtiss had the smallest machine of any of those entering into competition. The smallest was La Demoiselle, made by Santos-Dumont, the proportions of which were: plane length 20 feet, extreme breadth 18 feet, surface area 100 square feet, Clement-Bayard 2-cylinder, 30 h. p. motor, Chauviere propeller, 6 feet 6 inches in diameter, 1,100 r. p. m.
Winnings Made with Monoplanes.
Operators of monoplanes won a fair share of the cash prizes.
They won $30,283 out of a total of $63,250, to say nothing about Grahame-White's winnings. The latter won $13,600, but part of his winning flights were made in a Bleriot monoplane, and part in a Farman machine. Aside from Grahame-White the winnings were divided as follows: Moissant (Bleriot) $13,350;Latham (Antoinette) $8,183; Aubrun (Bleriot) $2,400;De Lesseps (Bleriot) $2,300; Drexel (Bleriot) $1,700; Radley (Bleriot) $1,300; Simon (Bleriot) $750; Andemars (Clement-Bayard) $100; Barrier (Bleriot) $100.
Out of a total of $30,283, operators of Bleriot machines won $21,900, again omitting Grahame-White's share. If the winnings with monoplane and biplane could be divided so as to show the amount won with each type of machine the credit side of the Bleriot account would be materially enlarged.
The Most Popular Monoplanes.
While the number of successful monoplanes is increasing rapidly, and there is some feature of advantage in nearly all the new makes, interest centers chiefly in the Santos-Dumont, Antoinette and Bleriot machines. This is because more has been accomplished with them than with any of the others, possibly because they have had greater opportunities.
For the guidance of those who may wish to build a machine of the monoplane type after the Santos-Dumont or Bleriot models, the following details will be found useful.
Santos-Dumont--The latest production of this maker is called the "No. 20 Baby." It is of 18 feet spread, and 20 feet over all in depth. It stands 4 feet 2 inches in height, not counting the propeller. When this latter is in a vertical position the extreme height of the machine is 7 feet 5 inches. It is strictly a one-man apparatus. The total surface area is 115square feet. The total weight of the monoplane with engine and propeller is 352 pounds. Santos-Dumont weighs 110pounds, so the entire weight carried while in flight is 462pounds, or about 3.6 pounds per square foot of surface.
Bamboo is used in the construction of the body frame, and also for the frame of the tail. The body frame consists of three bamboo poles about 2 inches in diameter at the forward end and tapering to about 1 inch at the rear. These poles are jointed with brass sockets near the rear of the main plane so they may be taken apart easily for convenience in housing or transportation. The main plane is built upon four transverse spars of ash, set at a slight dihedral angle, two being placed on each side of the central bamboo. These spars are about 2 inches wide by 1 1/8-inch deep for a few feet each side of the center of the machine, and from there taper down to an inch in depth at the center bamboo, and at their outer ends, but the width remains the same throughout their entire length. The planes are double surfaced with silk and laced above and below the bamboo ribs which run fore and aft under the main spars and terminate in a forked clip through which a wire is strung for lacing on the silk. The tail consists of a horizontal and vertical surface placed on a universal joint about 10 feet back of the rear edge of the main plane. Both of these surfaces are flat and consist of a silk covering stretched upon bamboo ribs.
The horizontal surface is 6 feet 5 inches across, and 4 feet 9inches from front to back. The vertical surface is of the same width (6 feet 5 inches) but is only 3 feet 7 inches from front to back. All the details of construction are shown in the accompanying illustration.
Power is furnished by a very light (110 pounds) Darracq motor, of the double-opposed-cylinder type. It has a bore of 4.118 inches, and stroke of 4.724 inches, runs at 1,800 r. p. m., and with a 6 1/2-foot propeller develops a thrust of 242 1/2pounds when the monoplane is held steady.
