The word "framework" indicates not only the wooden frames of the main planes, auxiliary planes, rudders, etc., but the cloth coverings as well--everything in fact except the engine and propeller.
On the basis named the framework would weigh 686pounds, and the power plant 344. These figures are liberal, and the results desired may be obtained well within them as the novice will learn as he makes progress in the work.
Figuring on Surface Area.
It was Prof. Langley who first brought into prominence in connection with flying machine construction the mathematical principle that the larger the object the smaller may be the relative area of support. As explained in Chapter XIII, there are mechanical limits as to size which it is not practical to exceed, but the main principle remains in effect.
Take two aeroplanes of marked difference in area of surface. The larger will, as a rule, sustain a greater weight in relative proportion to its area than the smaller one, and do the work with less relative horsepower. As a general thing well-constructed machines will average a supporting capacity of one pound for every one-half square foot of surface area. Accepting this as a working rule we find that to sustain a weight of 1,200 pounds --machine and two passengers--we should have 600square feet of surface.
Distributing the Surface Area.
The largest surfaces now in use are those of the Wright, Voisin and Antoinette machines--538 square feet in each. The actual sustaining power of these machines, so far as known, has never been tested to the limit; it is probable that the maximum is considerably in excess of what they have been called upon to show.
In actual practice the average is a little over one pound for each one-half square foot of surface area.
Allowing that 600 square feet of surface will be used, the next question is how to distribute it to the best advantage. This is another important matter in which individual preference must rule. We have seen how the professionals disagree on this point, some using auxiliary planes of large size, and others depending upon smaller auxiliaries with an increase in number so as to secure on a different plan virtually the same amount of surface.
In deciding upon this feature the best thing to do is to follow the plans of some successful aviator, increasing the area of the auxiliaries in proportion to the increase in the area of the main planes. Thus, if you use 600square feet of surface where the man whose plans you are following uses 500, it is simply a matter of making your planes one-fifth larger all around.
The Cost of Production.
